Description
M⋅120e Four-room Mirage Digital Amplifier
| The M-120e Mirage Digital Amplifier supports four rooms of audio at 30 Watts per zone. Its smaller form factor offers flexibility with placement of the unit, enabling installation into a structured wiring enclosure or wall mounting. The M-120e provides simultaneous amplification for two local source inputs or two eAudioCast™ network streams in as many as 96 rooms. Wired with a simple Cat5 connection, the M-120e can be placed throughout the home or accessed wirelessly when used with the MMS-1e Mirage Music Streamer. | |
| High-resolution Support | All eSeries amplifiers support proprietary Autonomic eAudioCast™, enabling high-resolution audio (HRA), up to 24-bit/192kHz, over Ethernet. Place amplifiers, servers, and legacy source components anywhere in a residence and connect all components to the audio network with a single Cat5 cable at high resolution bit depths. |
|---|---|
| Installation Flexibility | The small form factor, eAudioCast technology, and the included mounting accessories afford installers with maximum flexibility in placement. The M-120e can be mounted on a wall near zone speakers, or in a structured wiring cabinet. Distributed eSeries components stream audio and control signals through the home network using a single Cat-5 connection to a router or switch. |
| Virtually Unlimited Zones | Multiple eSeries amplifiers can be utilized in any combination on a single network to support up to 96 zones of high-resolution audio with network-wide grouping capabilities. |
| Flexible Control Options | Control using the Mirage Media Controller application for iOS and Android devices; also, eSeries audio systems are fully compatible with the rich library of pre-programmed control system modules for all major automation platforms. |
| Mirage eSeries Ecosystem | The Mirage ecosystem is capable of handling up to 144 audio sources and 32 simultaneous eAudioCast streams, including high-resolution audio digital streams and local sources on a single network. |
| Rated Output Power, All Channels | 15W per channel @ 8Ω load |
|---|---|
| Total Harmonic Distortion (THD) | < 0.1% (10 Watt, 8Ω load) |
| Speaker Impedance | (Z1-Z4) 4Ω–8Ω |
| Input Sensitivity and Impedance (S1) | 0.72V / 22KΩ |
| Balanced Audio | 0.72V / 680Ω |
| Frequency Response | 20Hz–20kHz |
| Tone Control | ±12dB, 100Hz (Bass) ±12dB, 10kHz (Treble) |
| Signal-to-noise Ratio | 96dB (IHA-A, 1V input / unbalanced) |
| Source Outputs | (2) local source outputs; Digital Output1 mirrored to Zone1; Digital Output2 mirrored to Zone2; Impedance: 75Ω, 0.5V RMS |
| LAN Connection | (1) 8-wire RJ45 with 2 LED indicators; 10/100 Mbits/sec BaseT Ethernet port; green LED indicated link status; yellow LED indicated Ethernet activity |
| Keypad Controllers | (2) KP-6 in-wall keypad controller ports |
| Infrared Out | (1) IR transmit for control of third-party devices; 3.5mm jack current limited to 25mA |
| Zones | (4) Zones, expandable to 96 zones with additional supported Mirage amplifiers |
| Audio Adjustments | Per zone adjustments for Bass, Treble, Balance, Loudness, Audio Delay (up to 600ms), Zone Linking |
| Power Supply | 100–240V AC Ext DC 15V @ 5.3 (included) |
| Power Consumption | 79.5W |
| Environmental Requirements |
Humidity: 10% to 90% RH (non-condensing) Temperature: -13˚F to 185˚F (-25˚C to 85˚C) |
| Dimensions | With brackets: 6.5" x 5.8" x 1.4" (165mm x 147mm x 35mm) |
| Net Weight | 2 lbs (0.85 kg) |
| Mounting | (4) brackets for structured wire cabinet / wall mount |
| Warranty | 2-year limited warranty |
Expected Delivery Times
North Island - 2-6 Working Days
South Island - 3-10 Working Days
